No products were found matching your selection.
Other Related Products
-


- Width: 48mm / 1.88 inch
- Thickness: 45-65um total thickness
- Lengths: 50m / 100yd / 100m
- Core: 3 inch / 76.2mm paper core
- Colors: Clear and tan
- Use: Manual carton sealing
-


- Material: PP/polypropylene film backing
- Adhesive: Water-based acrylic pressure-sensitive adhesive
- Size: 48mm/50mm x 66m/100m
- Color: Clear, brown and selected custom colors
- Core: 76mm for standard tape dispensers
- Use: Quiet carton sealing in shared packing areas
-


- Thickness: 20-35um, higher gauge after pallet load testing
- Gauge reference: 80-150 gauge for heavy duty wrapping
- Width: 450mm, 500mm, or equipment-matched size
- Color: clear standard, custom color for identification
- Core: 2 inch or 3 inch paper core
- Use: hand or machine wrapping for heavy loads
-


- Width: 24 mm, 36 mm, 48 mm, and 72 mm
- Length: 25 m, 50 m, or custom slitting
- Color: yellow, blue, green, or custom visible colors
- Backing: 130 um – 150 um crepe paper
- Adhesive: rubber or acrylic exterior masking adhesive
- Use: outdoor walls, frames, trims, and glass edges
-


- Common size: 48mm, 50mm, 72mm x 100m / 100yd
- Color: Crystal clear transparent finish
- Material: High-clarity BOPP film
- Adhesive: Water-based acrylic adhesive
- Core: 3 inch paper core
- Use: Carton sealing and label-visible packaging
-

Carton sealing tape specifications should identify the BOPP backing, adhesive system, total thickness, peel adhesion, initial tack, shear holding power, tensile strength, elongation, unwind behavior, temperature limits, and roll dimensions. This sheet supports clear, brown, colored, and printed hand or machine grades. Laboratory values aid comparison, but the intended carton, load, climate, and equipment still require sample testing before full use.
-


- Material: OPP/BOPP film with acrylic adhesive
- Common width: 48mm and 50mm
- Common length: 45m, 66m, 100m, or machine roll length
- Colors: red, yellow, blue, green, white, black, orange, brown
- Use: carton sealing, sorting, and product identification
- Supply form: hand rolls, machine rolls, slit rolls
-


- Color: black
- Backing: saturated crepe paper
- Adhesive: rubber-based adhesive
- Common roll: 50 mm x 50 m
- Thickness: 0.13 mm-0.18 mm
- Heat: around 80 C for 30 minutes
-


- Color: Soft pink for sensitive-zone recognition
- Backing: Flexible crepe paper, 58-70 g/m2
- Adhesive: Low tack or medium tack rubber-based PSA
- Widths: 12 mm, 18 mm, 24 mm, 36 mm, 48 mm
- Length: 25 m, 50 m, or custom slit rolls
- Use: Delicate surface masking and interior painting